CAST Software asked us at Sin City Scenic to build them some glowing X’s to match the branding of their BlackTrax product line.
Hi.
You've found me, have a look
around and see what I'm about.
You've found me, have a look
around and see what I'm about.
Well you've found me. Have a look a see what I'm all about.
All tagged LEDs
CAST Software asked us at Sin City Scenic to build them some glowing X’s to match the branding of their BlackTrax product line.
Continuing work on my Senior Capstone project for my EE degree. This covers initial breadboarding and minimum viable firmware development.
I decided it was time to write about my senior design project. Surprise surprise it involves LEDs.
Zumanity by Cirque du Soleil wanted to add some color to a guest photo op in the lobby of their theatre and they came to Sin City Scenic to have us build and install the new elements.
Final preparations of the LED cube for the Hackaday Superconference and some images and video of the cube in action!
An update on my LED cube that focuses on the microcontroller firmware that will drive the cube.
A prototype single color 4x4x4 LED cube that is part of a larger experiment to create an RGB 8x8x8 LED cube.
The Macrofab Engineering Podcast liked my entry to the design challenge and will manufacture it. Now I have to finalize the design.
At Sin City Scenic we built an incredible industrial drum platform for Magic Mike Live.
The Macrofab Engineering Podcast had a design challenge to create a ring of LEDs that indicate a potentiometer's position. This is my entry.
A timer that takes in 120V mains AC and uses the 60 Hz frequency for timing before transforming and rectifying to 5V DC for the digital logic.
Frankie Moreno's automated and LED mapped Hero Piano for his show “Under the Influence”.